{"title":"Black Stove Paint","description":"\u003cp data-start=\"5825\" data-end=\"6077\"\u003eBlack stove paint is a specialist heat-resistant coating designed for wood burners, flues, chimneys, fire surrounds and hot metal surfaces. It provides a smart black finish while resisting blistering, flaking and discolouration caused by heat exposure.\u003c\/p\u003e\n\u003cp data-start=\"6079\" data-end=\"6207\"\u003eThese coatings are ideal for restoring stoves, heating appliances, BBQs and exhaust components where ordinary paints would fail.\u003c\/p\u003e\n\u003cp data-start=\"6209\" data-end=\"6269\"\u003eBlack stove paint improves both appearance and service life.\u003c\/p\u003e","products":[{"product_id":"intertherm-50","title":"Intertherm 50","description":"\u003cp\u003eA single component, high temperature coating for the protection of steel from corrosion at temperatures up to 540°C (1004°F). \u003cbr\u003e\u003c\/p\u003e\n\u003cbr\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eAvailable in: 6 litre units.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cbr\u003e\u003cbr\u003e--\u003cbr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cbr\u003e\n\u003cbr\u003eIntertherm 50 is a single component, high temperature coating based on a moisture-curing silicone binder, Intertherm 50 is ideal for the protection of steel from corrosion at temperatures up to 540°C (1004°F).\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eFor technical advice, or a quote please call; \u003cstrong\u003e01933 426225, \u003c\/strong\u003eemail; \u003ca style=\"color: #000000;\" href=\"mailto:uksales@industrialcoatingsltd.com\"\u003e\u003cstrong\u003euksales@industrialcoatingsltd.com\u003c\/strong\u003e\u003c\/a\u003e or simply use our enquiry form.\u003c\/span\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eProduct Description:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cbr\u003eA single component, high temperature coating, based on a moisture curing silicone binder.\n\u003cp\u003eThe moisture curing crosslinking mechanism allows multiple coats to be applied without heat curing. Suitable for temperatures up to 540°C (1004°F). \u003cbr\u003e\u003c\/p\u003e\n\u003ch3\u003e\u003cstrong\u003eIntended Uses:\u003c\/strong\u003e\u003c\/h3\u003e\n\u003cbr\u003eFor the protection of steel from corrosion on areas including flare stacks, chimneys, exhausts, vents and pipework, at temperatures up to 540°C (1004°F).\n\u003cp\u003eWhere maximum corrosion protection is required, application should be over a zinc silicate primer (e.g. Interzinc 22).\u003c\/p\u003e\n\u003cp\u003eFor \u003cstrong\u003efree \u003c\/strong\u003etechnical advice, a quote or product support, please call us on \u003cstrong\u003e01933 426225 \u003c\/strong\u003eor email \u003cstrong\u003e\u003ca href=\"mailto:uksales@industrialcoatingsltd.com\"\u003euksales@industrialcoatingsltd.com\u003c\/a\u003e. \u003c\/strong\u003eAlternatively, use our enquiry form and we will respond shortly.\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e","brand":"International Paint","offers":[{"title":"Aluminium \/ 6 Litres","offer_id":43353037832430,"sku":null,"price":171.31,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/5036\/9518\/files\/Intertherm50.png?v=1708098470"},{"product_id":"intertherm-891","title":"Intertherm 891","description":"\u003cp\u003eIntertherm 891 is a one component, general purpose heat resistant paint, based on air drying oleoresinous resins, and pigmented with aluminium flake.\u003c\/p\u003e\n\u003cp\u003eAvailable in: 5 litre and 20 litre units.\u003c\/p\u003e\n\u003cbr\u003e--\u003cbr\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003cbr\u003e \u003cbr\u003eIntertherm 891 is a one component, general purpose heat resistant paint, based on air drying oleoresinous resins, and pigmented with aluminium flake.\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eFor technical advice, or a quote please call; \u003cstrong\u003e01933 426225, \u003c\/strong\u003eemail; \u003ca style=\"color: #000000;\" href=\"mailto:uksales@industrialcoatingsltd.com\"\u003e\u003cstrong\u003euksales@industrialcoatingsltd.com\u003c\/strong\u003e\u003c\/a\u003e or simply use our enquiry form.\u003c\/span\u003e \u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eProduct Description:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cbr\u003eA one component, general purpose heat resistant paint, based on air drying oleoresinous resins, and pigmented with aluminium flake. \u003cbr\u003e\n\u003ch2\u003e\u003cstrong\u003eIntended Uses:\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cbr\u003eAs a heat resistant coating for general site use or as an industrial maintenance coating on both ambient and high temperature steelwork up to 315ºC (600ºF) where an economical aluminium finish is required.\n\u003cp\u003eSuitable for all types of operations including refineries, offshore structures, power, petrochemical and chemical plants.\u003c\/p\u003e\n\u003cp\u003e\u003cspan style=\"color: #000000;\"\u003eFor technical advice, or a quote please call; \u003cstrong\u003e01933 426225, \u003c\/strong\u003eemail; \u003ca style=\"color: #000000;\" href=\"mailto:uksales@industrialcoatingsltd.com\"\u003e\u003cstrong\u003euksales@industrialcoatingsltd.com\u003c\/strong\u003e\u003c\/a\u003e or simply use our enquiry form.\u003c\/span\u003e\u003c\/p\u003e\n\u003cp\u003e \u003c\/p\u003e\n\u003ch2\u003e\u003cspan style=\"color: #000000;\"\u003e\u003c\/span\u003e\u003c\/h2\u003e","brand":"International Paint","offers":[{"title":"5 Litres \/ Aluminium","offer_id":43353037963502,"sku":"","price":61.22,"currency_code":"GBP","in_stock":true},{"title":"20 Litres \/ Aluminium","offer_id":43353037930734,"sku":"","price":223.26,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/5036\/9518\/files\/Intertherm891.png?v=1708099725"},{"product_id":"guard-htb","title":"Guard HTB","description":"\u003ch2\u003eDescription\u003c\/h2\u003e\n\u003cp data-start=\"924\" data-end=\"1212\"\u003eGuard HTB is a high performance, single pack silicone-based heatproof paint black developed for steel exposed to extreme temperatures up to 550°C. This tough black heat resistant paint provides a durable, protective and decorative finish for a wide range of heated metal surfaces.\u003c\/p\u003e\n\u003cp data-start=\"1214\" data-end=\"1648\"\u003eCommonly used as stove paint, stove paint matt black, black stove paint heat resistant, and log burner paint, Guard HTB is also ideal as bbq paint, bbq paint black high heat, barbeque paint black, and chiminea paint black. It performs exceptionally well as fireplace paint, black fireplace paint, and wood burner paint, offering reliable protection in both domestic and industrial settings.\u003c\/p\u003e\n\u003cp data-start=\"1650\" data-end=\"1964\" data-is-last-node=\"\" data-is-only-node=\"\"\u003eEngineered as a professional grade heat paint black and high heat black paint, Guard HTB provides a strong alternative within the market to products such as Rustoleum high heat paint and Rustins high heat black paint, delivering consistent protection where durable heat proof paint is required.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Size:\u003c\/strong\u003e 5 litres\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Black\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss Level:\u003c\/strong\u003e Matt, Sheen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/5036\/9518\/files\/Guard-HTB-e1646837760396.png?v=1663916492\" alt=\"Guard HTB\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e  \u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003eGuard HTB is a single component paint which is ideal for interior use onto suitably prepared steel and metal. Temperature resistant up to 600°C.\u003c\/p\u003e\n\u003cp\u003e  \u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrush:\u003c\/strong\u003e Yes. Small areas only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoller: \u003c\/strong\u003eYes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConventional Spray:\u003c\/strong\u003e Yes. Thinner should not be required - maximum 5%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirless Spray:\u003c\/strong\u003e Yes. Not optimised\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir Assisted Airless Spray:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eFor further information and guidance on application, please refer to the Data Sheet or \u003ca href=\"https:\/\/www.industrialcoatingsltd.com\/contact\/\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e  \u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eDrying and Curing Time\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch Dry:\u003c\/strong\u003e 15-20 minutes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHard Dry:\u003c\/strong\u003e 4 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Cure:\u003c\/strong\u003e Will occur after coating has been raised to a service temperature of at least 220°C for 20-30 minutes\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRe-coatable:\u003c\/strong\u003e Not recommended - small areas only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eDrying times are based on temperatures of 20°C, lower temperatures will increase drying times. Please speak with our technical team before elevating temperatures or attempting to force cure any of our products unless already stated. Shop conditions such as having good airflow will optimise curing.\u003c\/p\u003e\n\u003cp\u003e  \u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003eShould be applied directly to suitably prepared steel. Not suitable to be top coated.\u003c\/p\u003e\n\u003cp\u003e  \u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eSurface Preparation\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure surfaces are clean, dry and free from grease and other contamination before coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eThoroughly degrease and where applicable, abrade to remove rust and promote good adhesion of the coating. For optimum corrosion protection, mild steel should be blast cleaned to Sa2.5.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eComplex structures may be more effectively cleaned by HPWJ (high pressure water jetting).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e  \u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eThinner\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.industrialcoatingsltd.com\/product\/guard-solvent-a\/\"\u003eGuard Solvent A\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e  \u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eCleanup\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.industrialcoatingsltd.com\/product\/guard-solvent-a\/\"\u003eGuard Solvent A\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eOnce painting has been completed, clean all equipment with above mentioned cleaning solvent. Spray equipment should be appropriately flushed through for 3-5 minutes (returning unused paint to the tin, unless thinned which should be stored in a separate tin) before replacing any used solvent with clean solvent to leave in the pump, gun and lines.\u003c\/p\u003e\n\u003cp\u003e  \u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eSafety Precautions\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003eTo avoid the risk of spillage always store and transport in an upright secure position. Materials are hazardous and can also be flammable therefore appropriate precautionary measures must be taken including the use of gloves, glasses and recommended P.P.E in accordance with the material safety data sheets (MSDS).\u003c\/p\u003e\n\u003cp\u003ePlease refer to the product Data Sheet and Material Safety Data Sheets for full details regarding the safe use and storage of this product. We also offer free technical advice – \u003ca href=\"https:\/\/www.industrialcoatingsltd.com\/contact\/\"\u003eclick here to contact us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e  \u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cb\u003eContact Us\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003eFor further advice regarding the use of this product, technical support or a quotation please \u003ca href=\"https:\/\/www.industrialcoatingsltd.com\/contact\/\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Guard","offers":[{"title":"Matt","offer_id":43479243522286,"sku":"","price":91.93,"currency_code":"GBP","in_stock":true},{"title":"Sheen","offer_id":43479243555054,"sku":"","price":91.93,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/5036\/9518\/files\/Guard_FES_17.png?v=1769596233"},{"product_id":"guard-hts","title":"Guard HTS","description":"\u003ch2 data-start=\"43\" data-end=\"316\"\u003eDescription\u003c\/h2\u003e\n\u003cp data-start=\"43\" data-end=\"316\"\u003eGuard HTS is a single pack, solvent-based silicone alkyd heat resistant paint formulated for application onto properly prepared steel and metal surfaces. This durable high temperature paint provides protective and decorative performance at temperatures up to 550°C.\u003c\/p\u003e\n\u003cp data-start=\"318\" data-end=\"685\"\u003eSupplied as a premium silver heat resistant paint, Guard HTS is ideal for exhaust systems, flues, pipework and other hot metal surfaces requiring reliable heat proof paint metal protection. Designed as a professional high temp metal paint, it offers excellent adhesion and long-term resistance in demanding environments where standard coatings would fail.\u003c\/p\u003e\n\u003cp data-start=\"687\" data-end=\"874\"\u003eSuitable for industrial and commercial applications, Guard HTS delivers dependable performance as a specialist heat resistant paint metal solution for elevated temperature conditions.\u003c\/p\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003ePack Size:\u003c\/strong\u003e 5 litres\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eColour:\u003c\/strong\u003e Silver\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eGloss Level:\u003c\/strong\u003e Sheen\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cdiv style=\"text-align: left;\"\u003e\u003cimg src=\"https:\/\/cdn.shopify.com\/s\/files\/1\/0653\/5036\/9518\/files\/Guard-HTS-e1646837703187.png?v=1663916316\" alt=\"Guard HTS\" style=\"margin-bottom: 16px; float: none;\"\u003e\u003c\/div\u003e\n\u003cp\u003e\u003cbr\u003e  \u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eRecommended Uses\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003eGuard HTS is a single component silicone alkyd paint which is ideal for interior use onto suitably prepared steel and metal. Temperature resistant up to 550°C.\u003c\/p\u003e\n\u003cp\u003e  \u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eApplication\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eBrush:\u003c\/strong\u003e Yes. Small areas only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRoller: \u003c\/strong\u003eNo. Not optimised\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eConventional Spray:\u003c\/strong\u003e Yes. Thinner should not be required - maximum 5%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAirless Spray:\u003c\/strong\u003e Yes. Thinner should not be required - maximum 5%\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eAir Assisted Airless Spray:\u003c\/strong\u003e No\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eFor further information and guidance on application, please refer to the Data Sheet or \u003ca href=\"https:\/\/www.industrialcoatingsltd.com\/contact\/\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e  \u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eDrying and Curing Time\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eTouch Dry:\u003c\/strong\u003e 1-2 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eHard Dry:\u003c\/strong\u003e 6 hours\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eFull Cure:\u003c\/strong\u003e Needs to be cured at 200°C for 1 hour to obtain full cure\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003e\n\u003cstrong\u003eRe-coatable:\u003c\/strong\u003e Not recommended - small areas only\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003eDrying times are based on temperatures of 20°C, lower temperatures will increase drying times. Please speak with our technical team before elevating temperatures or attempting to force cure any of our products unless already stated. Shop conditions such as having good airflow will optimise curing.\u003c\/p\u003e\n\u003cp\u003e  \u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eCompatibility\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003eShould be applied directly to suitably prepared steel. Not suitable to be top coated.\u003c\/p\u003e\n\u003cp\u003e  \u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eSurface Preparation\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eEnsure surfaces are clean, dry and free from grease and other contamination before coating.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eThoroughly degrease and where applicable, abrade to remove rust and promote good adhesion of the coating. For optimum corrosion protection, mild steel should be blast cleaned to Sa2.5.\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003c\/p\u003e\n\u003cul\u003e\n\u003cul\u003e\n\u003cli\u003eComplex structures may be more effectively cleaned by HPWJ (high pressure water jetting).\u003c\/li\u003e\n\u003c\/ul\u003e\n\u003c\/ul\u003e\n\u003cp\u003e\u003cbr\u003e\u003cbr\u003e  \u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eThinner\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.industrialcoatingsltd.com\/product\/guard-solvent-a\/\"\u003eGuard Solvent A\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003e  \u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eCleanup\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003e\u003ca href=\"https:\/\/www.industrialcoatingsltd.com\/product\/guard-solvent-a\/\"\u003eGuard Solvent A\u003c\/a\u003e\u003c\/p\u003e\n\u003cp\u003eOnce painting has been completed, clean all equipment with above mentioned cleaning solvent. Spray equipment should be appropriately flushed through for 3-5 minutes (returning unused paint to the tin, unless thinned which should be stored in a separate tin) before replacing any used solvent with clean solvent to leave in the pump, gun and lines.\u003c\/p\u003e\n\u003cp\u003e  \u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cstrong\u003eSafety Precautions\u003c\/strong\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003eTo avoid the risk of spillage always store and transport in an upright secure position. Materials are hazardous and can also be flammable therefore appropriate precautionary measures must be taken including the use of gloves, glasses and recommended P.P.E in accordance with the material safety data sheets (MSDS).\u003c\/p\u003e\n\u003cp\u003ePlease refer to the product Data Sheet and Material Safety Data Sheets for full details regarding the safe use and storage of this product. We also offer free technical advice – \u003ca href=\"https:\/\/www.industrialcoatingsltd.com\/contact\/\"\u003eclick here to contact us\u003c\/a\u003e.\u003c\/p\u003e\n\u003cp\u003e  \u003cbr\u003e\u003c\/p\u003e\n\u003ch2\u003e\u003cb\u003eContact Us\u003c\/b\u003e\u003c\/h2\u003e\n\u003cp\u003e\u003cbr\u003eFor further advice regarding the use of this product, technical support or a quotation please \u003ca href=\"https:\/\/www.industrialcoatingsltd.com\/contact\/\"\u003econtact us\u003c\/a\u003e.\u003c\/p\u003e","brand":"Guard","offers":[{"title":"Default Title","offer_id":43353107202286,"sku":null,"price":94.64,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/5036\/9518\/files\/Guard_FES_17.png?v=1769596233"},{"product_id":"jotun-solvalitt","title":"Jotun Solvalitt","description":"\u003cp\u003eJotun Solvalitt is a heat resisting paint based on silicone acrylic binder.\u003c\/p\u003e\n\u003ch3\u003eProduct description:\u003c\/h3\u003e\n\u003cbr\u003eThis is a one component physically drying silicone acrylic coating. It is heat resistant up to 600 C. Can be used as primer, mid coat or finish coat in atmospheric environments. Suitable for properly prepared carbon steel, galvanised steel, stainless steel and aluminium substrates. \u003cbr\u003e\n\u003ch3\u003eTypical Use:\u003c\/h3\u003e\n\u003cbr\u003eProtective: Designed as a heat resistant coating. Suitable for insulated and non insulated surfaces. Recommended as finish coat for insulated surfaces, in systems with suitable primers\n\u003cp\u003ePlease note: Due to variations in the thermal stability of pigments, slight colour changes can occur when the coating is heated. Such a colour change will not affect the performance of the coating.\u003c\/p\u003e","brand":"Jotun","offers":[{"title":"5 Litres \/ Ral T1 SL","offer_id":54467029041537,"sku":null,"price":193.21,"currency_code":"GBP","in_stock":true},{"title":"5 Litres \/ Ral T2 SL","offer_id":54467033399681,"sku":null,"price":203.74,"currency_code":"GBP","in_stock":true},{"title":"5 Litres \/ Ral T3 SL","offer_id":54467033432449,"sku":null,"price":219.27,"currency_code":"GBP","in_stock":true},{"title":"5 Litres \/ BS Tier 1 SL","offer_id":54467033465217,"sku":null,"price":193.21,"currency_code":"GBP","in_stock":true},{"title":"5 Litres \/ BS Tier 2 SL","offer_id":54467033497985,"sku":null,"price":203.74,"currency_code":"GBP","in_stock":true},{"title":"5 Litres \/ BS Tier 3 SL","offer_id":54467033530753,"sku":null,"price":219.27,"currency_code":"GBP","in_stock":true}],"thumbnail_url":"\/\/cdn.shopify.com\/s\/files\/1\/0653\/5036\/9518\/products\/Solvalitt.jpg?v=1659954242"}],"url":"https:\/\/industrialcoatingsltd.com\/collections\/black-stove-paint.oembed","provider":"Industrial Coatings Ltd","version":"1.0","type":"link"}