Improving Steel Coating Efficiency at Invista's Manufacturing Plant with PPG Sigmafast 278

Location: Rozenburg, Netherlands
Client: Invista Netherlands
Coating contractor: Metaalbescherming Katwijk (MBK)
Manufacturer: PPG
Product focus: PPG Sigmafast 278

Project overview

Industrial steel fabrication projects often operate to demanding production schedules, where delays in surface preparation, coating and curing can affect delivery times.

For the construction of a new nylon salt manufacturing facility at Invista's plant in Rozenburg, Netherlands, steel coating specialist Metaalbescherming Katwijk required a protective coating system that would improve manufacturing efficiency.

The project involved coating approximately 7,500 square metres of steelwork.

PPG Sigmafast 278 was selected to help reduce coating application time while maintaining the required protective performance.


max.ppg.com

 

The challenge

MBK operates a large industrial steel coating facility, processing significant quantities of structural steel each week.

For this project, the company needed to coat fabricated components efficiently before delivery to the construction site.

Traditional three-coat systems can require several application stages, with drying and overcoating intervals between each layer.

These stages can increase handling time and extend the period that steel components remain in the paint shop.

MBK wanted a system that would reduce these delays without compromising the corrosion protection required for the industrial facility.

The coating solution

PPG Sigmafast 278 – Fast-drying epoxy protection

PPG recommended Sigmafast 278, a high-solids zinc phosphate epoxy coating incorporating phenalkamine technology.

The selected system consisted of:

  • PPG Sigmafast 278 at 200 microns

  • PPG Sigmadur 520 at 60 microns

This two-coat system was selected instead of a conventional three-coat approach.

Sigmafast 278 offered several important application advantages, including fast drying, a broad application thickness range and no induction time.

Under the conditions reported in the case study, the coating was touch-dry after approximately one hour and ready for overcoating after two hours.

These properties helped reduce waiting periods between coating operations.

The application process

The project involved approximately 7,500 square metres of fabricated steelwork.

Around 5,000 litres of Sigmafast 278 were used during the coating programme.

The system was applied using airless spray equipment, allowing the contractor to achieve the specified coating thickness while maintaining efficient production.

By reducing the number of coating stages, MBK was able to simplify the coating process and move components through the paint shop more quickly.

The project outcome

The two-coat Sigmafast 278 system helped improve production efficiency while delivering the required protective finish.

According to PPG, the project achieved:

  • Shorter coating shop processing times

  • Faster delivery of fabricated steel

  • Reduced overall construction time

  • Improved application efficiency

  • Durable corrosion protection

MBK reported satisfaction with the coating's spray application characteristics and the improved speed of its production process.

The project demonstrates how selecting the right industrial coating system can influence manufacturing productivity as well as the protection of finished steelwork.


max.ppg.com

 

Why this project matters

For steel fabricators and industrial manufacturers, coating selection is not simply about corrosion resistance.

Drying times, handling requirements, application methods and the number of coats can all influence production schedules.

A fast-drying coating system may help reduce delays, improve workshop throughput and support more efficient delivery of finished components.

This project highlights the value of considering the complete coating process when selecting products for industrial manufacturing.

Looking for fast-drying industrial coatings?

Industrial Coatings Ltd supplies specialist epoxy primers, protective coatings and industrial finishes for steel fabrication and manufacturing applications.

Whether you're coating structural steel, fabricated components or industrial machinery, our team can help you explore products suited to your production requirements.

Explore our industrial coatings range or contact our team for technical advice.

Back to blog