- DESCRIPTION
- Datasheet
DESCRIPTION
Description
A high performance, low VOC, water borne two component epoxy with a high gloss finish.
Where To Use
A tough, hard wearing chemically resistant epoxy finish suitable for most circumstances where the odour or emissions from solvent based coatings are unacceptable.
For use on structural steel and equipment in a range of aggressive environments including those found in chemical and petrochemical plants, pulp and paper mills and power stations in both new construction and industrial maintenance situations, under controlled conditions.
Suitable for application to correctly prepared concrete floors and walkways.
Colour | Wide range via the Chromascan system |
Gloss Level | High Gloss |
Volume Solids | 50% ± 3% (depends on colour) |
Typical Thickness | 50-75 microns (2-3 mils) dry equivalent to 100-150 microns (4-6 mils) wet |
Theoretical Coverage | 10 m²/litre at 50 microns d.f.t and stated volume solids 401 sq.ft/US gallon at 2 mils d.f.t and stated volume solids |
Practical Coverage | Allow appropriate loss factors |
Method of Application | Air Spray, Airless Spray, Brush, Roller |
Datasheet
×