- DESCRIPTION
- Datasheet
DESCRIPTION
Top quality indoor floor paint.
Stir the contents of the pot well. Apply in thin, even, well-spread coats. Ensure adequate ventilation.
Apply the product diluted with rubber paint solvent 300 as preparation, and then a minimum of two coats as described on the container.
Remove damaged paintwork and proceed as for unpainted surfaces.
- Pack Size: 4 Litres
- Colour: RAL 7038 Grey
- Finish: Semi-matt
Product Description
Top quality indoor floor paint based on chlorinated rubber resins. Finish is resistant to abrasion, scrubbing, chemical aggression and dirt in general. Suitable for use on concrete floors, cement mortars and other related materials. Recommended for use indoors or on covered surfaces.
Advantages
- Good covering power
- Easy to apply
- For indoor use / covered surfaces
- Ideal for garages, sports halls, washrooms, industrial buildings
- Suitable for concrete floors, cement mortars and related materials
- Resistant to abrasion, wear, washing, chemical attacks and grime
- Prevents the build up of dust
- Prevents erosion
- Touch-dry in 30 minutes
- Recoatable after 24 hours
- Finish: Semi-matt
Product Uses
- Indoor floors
- Concrete floors
- Cement mortar and other derivatives
- Garages
- Sports halls
- Signposts
- Washrooms
- Industrial buildings
- Indoor car parks
Further Details and Technical Data
Technical Information
- Colour: RAL 7038 Grey
- Finish: Semi-matt
- Touch-dry: 30 minutes, depending upon thickness applied and atmospheric conditions
- Recoat After: 24 hours
- Yield: 9-12 m²/l, per coat, depending on the state and type of surface
- Storage: Up to 1 year unopened, in original packaging at normal temperature and humidity. Store in places protected against frost
Surface Preparation
Surfaces should be sanded, clean, dry and free from dust, grease, oil and moisture. Clean floor, dry and well-hardened (28 days).Residual floor humidity at 6%. Preferably rough to improve adherence.
Application
- Round brush
- Airless spray gun
Stir the contents of the pot well. Apply in thin, even, well-spread coats. Ensure adequate ventilation.
On unpainted surfaces
Apply the product diluted with rubber paint solvent 300 as preparation, and then a minimum of two coats as described on the container.
On surfaces with old paintwork
Remove damaged paintwork and proceed as for unpainted surfaces.
Hazardous Statement
- Aquatic Chronic 2: H411 - Toxic to aquatic life with long lasting effects
- Flam. Liq. 3: H226 - Flammable liquid and vapour
- Irrit. 2: H315 - Causes skin irritation
Contact Us
For further advice regarding the use of this product, technical support or a quotation please contact us.Datasheet
×