International Interzone 3507

International Interzone 3507 is a high performance, two component, high solids epoxy barrier coating system for the protection of subsea structures and is suitable for low temperature curing.

• Pack size: 20 litre unit

• Colours: Aluminium
    

Recommended Uses

International Interzone 3507 is primarily designed for use as a two coat coating system for the protection of subsea structures, and approved for NORSOK M501 Rev 5 system 7 subsea.

 

Surface Preparation

The performance of International Interzone 3507 will depend upon the degree of surface preparation. The surface to be coated should be clean, dry and free from contamination. Prior to paint application, all surfaces should be assessed and treated in accordance with ISO 8504:2000. Oil or grease should be removed in accordance with SSPC-SP1 solvent cleaning.

 

Method of Application

• Airless Spray

• Air Spray

• Brush

• Roller

Please refer to the Data Sheet for additional preparation, application and safety instructions prior to usage.

 

Systems Compatibility

International Interzone 3507 is generally applied to bare steel prepared by dry abrasive blasting.

Recommended Primers for Interzone 3507:

• Interzinc 52 epoxy primer

Recommended Topcoats for Interzone 3507:

• Intergard 740 epoxy finish

• Interthane 990 polyurethane finish

For other suitable primers and topcoats please contact us for technical advice.

 

Thinner

The recommended thinner for Interzone 3507 is International Thinner GTA220. Do not thin more than is allowed by local environmental legislation.

 

Clean Up

Do not allow material to remain in hoses, gun or spray equipment. Thoroughly flush all equipment with International Thinner GTA822. Once units of paint have been mixed they should not be resealed and it is advised that after prolonged stoppages work recommences with freshly mixed units.

Clean all equipment immediately after use with International Thinner GTA822. It is good working practice to periodically clean equipment during the course of the working day. Frequency of cleaning will depend upon amount used, temperature and elapsed time, including any delays.

All surplus materials and empty containers should be disposed of in accordance with appropriate regional regulations/legislation.

 

Safety Precautions

This product is intended for use only by professional applicators in industrial situations in accordance with the advice given on the Data Sheet, the Material Safety Data Sheet and the container(s), and should not be used without reference to the Material Safety Data Sheet (MSDS).

All work involving the application and use of this product should be performed in compliance with all relevant national, Health, Safety and Environmental standards and regulations.

In the event welding or flame cutting is performed on metal coated with this product, dust and fumes will be emitted which will require the use of appropriate personal protective equipment and adequate local exhaust ventilation.

 

Contact Us

For further advice regarding the use of this product, technical support or a quotation please contact us.