Skip to product information
1 of 3

ShotCrete 513

ShotCrete 513

Brand: Natural Cement

A fast setting and curing rapid strength gain dry spray concrete that is resistant to chloride penetration consisting of a blend of natural cement based binder specially selected and dried loose graded aggregates all passing a 2 mm sieve. -- read more

Contact us for price and availability details
×

Request price and availability details


Your data is safe with us. We will never pass on your details to a third party. You can view our Privacy Policy here

View full details
  • DESCRIPTION
  • Datasheet

DESCRIPTION

A fast setting and curing rapid strength gain dry spray concrete that is resistant to chloride penetration consisting of a blend of natural cement based binder specially selected and dried loose graded aggregates all passing a 2 mm sieve.

--

 

ShotCrete 513

ShotCrete 513


ShotCrete 513 is a fast setting and curing rapid strength gain dry spray concrete that is resistant to chloride penetration consisting of a blend of natural cement based binder specially selected and dried loose graded aggregates all passing a 2 mm sieve.

    • Reg. 31 Approved for use in public water supplies

    • Yield: Generally 1 x 25 kg bag of ShotCrete 513 mixed with a water/cement ratio of 38% will produce approximately 10 litres of concrete

    • Pricing: Please contact us for a free quotation


 

Product Description


ShotCrete 513 is a concrete repair mortar is based on a Natural Cement based binder. It is a dry spray environmentally friendly, fast setting, high early strength concrete repair material that starts at 20ºc to set in 4 minutes and is totally set in 10 minutes.

The product only requires to be added to water (see mixing instructions for further details) and unlike most other manufacturers products does not require primers, bonding agents and or curing agents. It can be used in cold & wet conditions, sets under water and can be, if required, from a minimum of 10 mm built up layer on layer to any thickness. This product can also be used to stop running water. This product is Reg.31 approved for contact with drinking water with only ½ hour curing period after set required.

 

ShotCrete 513 Benefits

Recommended Uses



    • Chemical Resistance

    • Concrete Repairs

    • Tanking

    • Reg.31 Approved products for contact with drinking water

    • Sprayed Concrete

    • Horizontal and vertical repairs

    • Repairs to sewers

    • Work around the sea including piers

    • Quay walls and off shore platforms

    • Repairs to bridges

    • Repairs to dams and viaducts

    • Tunnel repairs

    • Retaining wall repairs

    • Where high early strength is required

    • Where pollution and chemical attack is likely


 

Sectors



    • Utilities

    • Construction

    • Civil Engineering

    • Railways

    • Sea Defense

    • Mining

    • Water


 

Product Advantages



    • Fast-setting

    • Excellent adhesion

    • Low modules of elasticity excellent for loose or friable substrates

    • Low shrinkage

    • Excellent resistance to pure water, sulphated water, seawater and de-icing salts

    • Excellent resistance to aggressive chemicals

    • Very good cohesion and mixing

    • No curing necessary. It can be coated, covered or painted as soon as setting is complete

    • Can be used in wet conditions


NATCEM Product Range

 

Natural Cement Product Range






























NATCEM 35 NATCEM AC NATCEM D NATCEM DW
NATCEM Tank NATSEAL Grout 105 CWG Grout
LUL RapideSet ShotCrete AS90 ShotCrete 430F ShotCrete 437F
ShotCrete 513 ShotCrete 530 TrackCrete WaterStop

 

Related Product Videos


The following videos feature NATCEM 35 - please refer to the product data sheet for full instructions regarding the use of ShotCrete 513.

 

Surface Preparation


Please refer to the product data sheet or contact us for advice.

 

Mixing


Please refer to the product data sheet or contact us for advice.

 

Application


Please refer to the product data sheet or contact us for advice.

 

Cleanup


ShotCrete 513 should be removed from tools and equipment with water immediately after use.

 

Storage


ShotCrete 513 is packaged in a 25 kg polythene inner bag with a resealable tie within a stitch sealed woven polypropylene outer bag, which should be stored in dry conditions and will last for at least twelve months.

 

Precautions


We strongly recommend the use of gloves, goggles and mask. Please see the product safety data sheet or contact us for full details.

 

Contact Us


For further advice regarding the use of this product, technical support or a quotation please contact us.

Datasheet

×

Send us a message


Your data is safe with us. We will never pass on your details to a third party. You can view our Privacy Policy here