Skip to product information
1 of 3

ShotCrete 430F

ShotCrete 430F

Brand: Natural Cement

Fast-setting and fast-curing rapid strength gain dry spray concrete that is resistant to chloride penetration. Consisting of a blend of natural cement based binder specially selected and dried loose graded aggregates all passing an 8 mm sieve and steel fibres. read more

Contact us for price and availability details
×

Request price and availability details


Your data is safe with us. We will never pass on your details to a third party. You can view our Privacy Policy here

View full details
  • DESCRIPTION

DESCRIPTION

Fast-setting and fast-curing rapid strength gain dry spray concrete that is resistant to chloride penetration. Consisting of a blend of natural cement based binder specially selected and dried loose graded aggregates all passing an 8 mm sieve and steel fibres.


--

 

ShotCrete 430F

ShotCrete 430F


ShotCrete 430F is a fast-setting and fast-curing rapid strength gain dry spray concrete that is resistant to chloride penetration. Consisting of a blend of natural cement based binder specially selected and dried loose graded aggregates all passing an 8 mm sieve and steel fibres.

    • Yield: Generally 1 x 25 kg bag of ShotCrete 430F mixed with a water/cement ratio of 38% will produce approximately 10 litres of concrete

    • Pricing: Please contact us for a free quotation


 

Product Description


ShotCrete 430F is a concrete repair mortar based on a Natural Cement based binder. It is a fibre reinforced (steel or polypropylene) dry spray environmentally friendly, fast setting, high early strength concrete repair material that starts at 20ºc to set in 4 minutes and is totally set in 10 minutes.

The product only requires to be added to water (see mixing instructions for further details). Unlike most other manufacturers products, ShotCrete 430F does not require primers, bonding agents and or curing agents. It can be used in cold & wet conditions, sets under water and can be, if required, from a minimum of 38 mm built up layer on layer to any thickness. This product can be used dependent on the inflow to stop running water.

 

ShotCrete 430F Benefits

Recommended Uses



    • Chemical Resistance

    • Concrete Repairs

    • Sprayed Concrete

    • Horizontal and vertical repairs

    • Repairs to sewers

    • Work around the sea including piers

    • Quay walls and off shore platforms

    • Repairs to bridges

    • Repairs to dams and viaducts

    • Tunnel repairs

    • Retaining wall repairs

    • Where high early strength is required

    • Where pollution and chemical attack is likely


 

Sectors



    • Utilities

    • Construction

    • Civil Engineering

    • Railways

    • Sea Defense

    • Mining


 

Product Advantages



    • Fast-setting

    • Excellent adhesion

    • Low modules of elasticity excellent for loose or friable substrates

    • Low shrinkage

    • Excellent resistance to pure water, sulphated water, seawater and de-icing salts

    • Excellent resistance to aggressive chemicals

    • Very good cohesion and mixing

    • No curing necessary. It can be coated, covered or painted as soon as setting is complete

    • Can be used in wet conditions


NATCEM Product Range

 

Natural Cement Product Range






























NATCEM 35 NATCEM AC NATCEM D NATCEM DW
NATCEM Tank NATSEAL Grout 105 CWG Grout
LUL RapideSet ShotCrete AS90 ShotCrete 430F ShotCrete 437F
ShotCrete 513 ShotCrete 530 TrackCrete WaterStop

 

Related Product Videos


The following videos feature NATCEM 35 - please refer to the product data sheet for full instructions regarding the use of ShotCrete 430F.

 

Surface Preparation


Please refer to the product data sheet or contact us for advice.

 

Mixing


Please refer to the product data sheet or contact us for advice.

 

Application


Please refer to the product data sheet or contact us for advice.

 

Cleanup


ShotCrete 430F should be removed from tools and equipment with water immediately after use.

 

Storage


ShotCrete 430F is packaged in a 25 kg polythene inner bag with a resealable tie within a stitch sealed woven polypropylene outer bag, which should be stored in dry conditions and will last for at least twelve months.

 

Precautions


We strongly recommend the use of gloves, goggles and mask. Please see the product safety data sheet or contact us for full details.

 

Contact Us


For further advice regarding the use of this product, technical support or a quotation please contact us.

×

Send us a message


Your data is safe with us. We will never pass on your details to a third party. You can view our Privacy Policy here