Nufins Uniseal 150

Description

Uniseal 150 is a high performance one part low modulus polyurethane sealant specifically developed for the sealing of contraction and expansion joints in civil engineering and building structures.

Where to use

• Service reservoirs
  
• Water treatment plants
  
• Raw water storage tanks
  
• Waste water treatment works

Advantages

• One part therefore easy to apply
  
• Excellent acoustic ratings
  
• Excellent resistance to weathering
  
• Permanently flexible
  
• Low odour
  
• 20% total joint movement

Technical Information

Colours available: Grey

U.V Resistance: Excellent

Type: Thixotropic polyurethane

Application temperature: 5c to 35c

Service temperature: -30c to 80c

Primers

Apply one coat of Uniseal Primer P2 and allow to dry for between 45 minutes and 2 hours

Application

Before starting application, ensure that any primer or cleaner has dried fully. Cut the end of the sachet with a sharp knife and place the sachet into a 600 ml Nufins Barrel Gun. Extrude the sealant into the base of the joint and ensure that full contact is made with the sides. Care should be taken to avoid trapping air within the sealant.