USES:
High performance interior and exterior varnish with superior properties.
FEATURES:
RD-Monovar PU is a single-component varnish based on acrylic and polyurethane resins that offers a hard flexible and wear resistant film that can be used for decorative and protective purposes including floors.
RD-Monovar PU is water-based, easy to handle, safe and has no fire risks.
It is a fast-drying coating system that greatly reduces downtime during installation.
Virtually odour free, it does not affect neighbouring occupants and can therefore be used in occupied buildings.
RD-Monovar PU creates a nice and smooth finish. Thanks to its high-quality pigments and resins, it has a very good resistance against humidity, water and has a very good outdoor durability. It can cover most kind of existing coatings to strengthen the film surface and further protect against dirt, pollution, weathering and UVs. It can be used on walls in humid rooms of technical rooms like kitchens or bathrooms to obtain a tighter finish, easier to clean, and more resistant to humidity or stains.
SUBSTRATES:
Various plastics, concrete, cement, wood, metal (with primer), coated surfaces.
APPLICATION CONDITIONS:
Ambient temperature: minimum 5C (41F) Optimal between 12 and 27C (54 and 77F).
Relative humidity: maximum 80 %
Surface temperature must be minimum 3C (5F) above dew point.
APPLICATION MEANS:
Brush, roller or spray gun.
Compressed air: nozzle opening 1,4 mm 4 to 6 bars of pressure (60 to 90 psi)
Airless: nozzle opening 007 to 009 Pressure +/- 70 bars (+/- 1000 psi)
PREPARATION OF THE SUBSTRATE:
Preparation will depend on the kind of substrate. In general, the surface must always be cleaned and degreased prior to applying RD-Monovar PU.
DILUTION:
Product is ready-for-use.
DRYING TIME (20?C – 68?F):
Touch dry: +/- 1h30 hours
Dry: +/- 2 hours
Recoatable: +/- 4 hours
CLEANING OF TOOLS:
Water
PREPARATION:
Mix well before use.
