NATCEM Tank

Fast-setting mortar, containing a blend of Potable Water Approved Cement Binder. For tanking, waterproof renders, sewers, pipe joints, yards, overhead and so-on.

--

 

NATCEM Tank

NATCEM Tank is a fast setting and fast curing mortar with a rapid strength gain that is resistant to chloride penetration, consisting of a blend of Potable Water Approved Cement Binder, specially selected dried graded aggregates all passing a 2 mm sieve and retarders.

• Yield: Generally, 1 x 25 kg bag of NATCEM Tank mixed with 3.6 litres of water will produce 10 litres of finished mortar

• Pricing: Please contact us for a free quotation

 

Product Description

NATCEM Tank is a cementitious tanking system based on a Natural Cement based binder. It is an environmentally friendly, fast setting and high early strength tanking material that starts to set in 1 hour.

Natcem Tank only requires to be added to water and mixed for 2 minutes (see mixing instructions for further details), and unlike most other manufacturers products it does not require primers, bonding agents and or curing agents. It can be used in cold and wet conditions, sets under water and can be, if required, from a minimum of 10 mm built up layer on layer to any thickness and only requires a ½ hour curing period after set.

 

Recommended Uses

• Tanking

• Rendering

• Waterproof renders

• Work in and around sewers

• Work in food factories

• Work in and around the sea

• Animal sheds and silage pits

• Garage pits

• Basement tanking

• Farm yards and cess pits

• Pipe joints and benching

• Sealing garage pits

• Work wherever pollution or chemical attack is likely

• Overhead and horizontally

• Fine moulding

 

Sectors

• Utilities

• Construction

• Civil Engineering

• Railways

• Sea Defense

• Mining

 

Product Advantages

• Fast setting

• Excellent adhesion

• Low shrinkage

• Low modulus of elasticity makes it very effective on poor or friable substrates

• Excellent resistance to pure water and sulphated water

• Excellent resistance to aggressive chemicals

• Very good cohesion and mixing

• Fine compact surface

• No curing necessary. It can be coated, covered or painted as soon as setting is complete

• Can be used in wet conditions

• Can be used under water

• Low carbon dioxide permeability

• Low water permeability

 

 

Natural Cement Product Range

NATCEM 35	NATCEM AC	NATCEM D	NATCEM DW
NATCEM Tank	NATSEAL	Grout 105	CWG Grout
LUL RapideSet	ShotCrete AS90	ShotCrete 430F	ShotCrete 437F
ShotCrete 513	ShotCrete 530	TrackCrete	WaterStop

 

Related Product Videos

The following videos feature NATCEM 35 - please refer to the product data sheet for full instructions regarding the use of NATCEM Tank.

 

Surface Preparation

Please refer to the product data sheet or contact us for advice.

 

Mixing

Please refer to the product data sheet or contact us for advice.

 

Application

Please refer to the product data sheet or contact us for advice.

 

Cleanup

NATCEM Tank should be removed from tools and equipment with water immediately after use.

 

Storage

NATCEM Tank is packaged in a polythene inner bag with a resealable tie within a stitch sealed woven polypropylene outer bag, which should be stored in dry conditions and will last for at least twelve months.

 

Precautions

We strongly recommend the use of gloves, goggles and mask. Please see the product safety data sheet or contact us for full details.

 

Contact Us

For further advice regarding the use of this product, technical support or a quotation please contact us.