Fastop TG ESD

PRODUCT DESCRIPTION

FasTop™ TG ESD is a static-dissipative polyurethane cement flooring screed system which is laid at 6 to 9 mm nominal thickness.

ADVANTAGES

Static dissipative seamless matt finish 

High chemical resistance 

Hard wearing 

Slip resistant finish

RECOMMENDED USE

• A wide range of industrial applications such as:
• Pharmaceutical and chemical plants
• Electrical industrial areas 
• Food manufacturing areas 
• Oil & gas facilities 
• Industrial workshops

MIXING AND APPLICATION

Prior to mixing, the temperature of the four components must be between 15 and 25°C. Pre-mix the coloured base component before use. Add the FasTop™ TG ESD base to the mixing vessel then add the hardener component and mix using a low speed electric mixer (300 to 400 rpm) for approximately 30 seconds until homogeneous. Add the powder aggregate whilst mixing followed by the conductive aggregate, mixing for approximately 3 minutes until homogeneous scraping the sides of the mixing vessel until a uniform, lump-free mix is obtained. Apply to pre-primed areas and level between battens as necessary with a steel float. Where ease of cleaning is very important rather than slip resistance, the final finish can be smoothed by back rolling with a short nap roller. A single pass with the weight of the roller is usually sufficient.