TrackCrete

A fast setting and curing rapid strength concrete that is resistant to chloride penetration consisting of a blend of natural cement based binder, specially selected dried graded aggregates and food grade retarders.

--

 

TrackCrete

Hard wearing concrete repair material

TrackCrete is a fast setting and curing rapid strength concrete that is resistant to chloride penetration consisting of a blend of natural cement based binder, specially selected dried graded aggregates and food grade retarders.

• Yield: Generally, 1 x 25 kg bag of TrackCrete mixed with 2 litres of water will produce approximately 10 litres of concrete

• Pricing: Please contact us for a free quotation

 

Product Description

TrackCrete is a fast setting, hard-wearing concrete based on a Natural Cement based binder, it is an environmentally friendly, fast setting, high early strength concrete material that starts to set in 35 minutes.

The product only requires to be added to water and mixed for 2 minutes (see mixing instructions for further details), and unlike most other manufacturers products does not require primers, bonding agents and or other curing agents. It can be used in cold & wet conditions, sets under water and, if required, can be from a minimum of 38 mm built up layer on layer up to any thickness. It can receive foot traffic after 1 hour and car traffic 2 hours after set.

 

Recommended Uses

• Chemical Resistance

• Concrete Repairs

• Floor Screed

• Repairs to concrete crossings and slab track

• Repairs to concrete bridge deck

• Securing traffic lights

• Security rails and street furniture

• Casting of bridge decks

• Work around the sea

• Repairs to sewers

• Where the resistance to chemicals and sea water is required

 

Sectors

• Utilities

• Construction

• Civil Engineering

• Railways

• Sea Defense

• Mining

 

Product Advantages

• Excellent adhesion

• Low shrinkage

• Low modules of elasticity, which make it very effective on poor or friable substrates

• Excellent resistance to pure water & sulphated water

• Excellent resistance to aggressive chemicals

• Very good cohesion and mixing

• Fine compact surface

• No curing necessary. It can be coated, covered or painted as soon as setting is complete

• Can be used in wet conditions

• Can be used under water

• Fast setting

• High early strength

 

 

Natural Cement Product Range

NATCEM 35	NATCEM AC	NATCEM D	NATCEM DW
NATCEM Tank	NATSEAL	Grout 105	CWG Grout
LUL RapideSet	ShotCrete AS90	ShotCrete 430F	ShotCrete 437F
ShotCrete 513	ShotCrete 530	TrackCrete	WaterStop

 

Related Product Videos

The following videos feature NATCEM 35 - please refer to the product data sheet for full instructions regarding the use of TrackCrete.

 

Surface Preparation

Please refer to the product data sheet or contact us for advice.

 

Mixing

Please refer to the product data sheet or contact us for advice.

 

Application

Please refer to the product data sheet or contact us for advice.

 

Cleanup

TrackCrete should be removed from tools and equipment with water immediately after use.

 

Storage

TrackCrete is packaged in a 25 kg polythene inner bag with a resealable tie within a stitch sealed woven polypropylene outer bag, which should be stored in dry conditions and will last for at least twelve months.

 

Precautions

We strongly recommend the use of gloves, goggles and mask. Please see the product safety data sheet or contact us for full details.

 

Contact Us

For further advice regarding the use of this product, technical support or a quotation please contact us.