Send us a messageSend us a message
NaN 3

PPG SigmaCover 350

PPG SigmaCover 350

Brand: PPG

A two-pack, anticorrosive epoxy primer/coating deal for use in the marine and protective coatings sectors, including topsides, decks, superstructures and cargo holds

read more

Select Your Options

Size
Colour Group
Colour:
Select a Colour

£76.25
(£91.50 Inc VAT)
Sale Sold out
Shipping calculated at checkout.

Pickup available at Industrial Coatings Ltd

Usually ready in 2-4 days
View full details
  • DESCRIPTION
  • Datasheet

DESCRIPTION

Description

A two-pack, anticorrosive epoxy primer/coating deal for use in the marine and protective coatings sectors, including topsides, decks, superstructures and cargo holds.


    Where To Use


    PPG SigmaCover 350 is a two-component, high-build polyamide cured anticorrosive epoxy primer/coating.

    This surface tolerant coating is ideal for a wide range of uses in the marine and protective coatings sectors, including topsides, decks, superstructures and cargo holds. SigmaCover 350 has good impact and abrasion resistance, is fast-curing, and compatible with various aged coatings to ensure quick professional results. With excellent corrosion resistance this coating is also splash and spillage resistant to a wide range of chemicals.

    Easy to apply either by spray, brush or roller, SigmaCover 350 provides a semi-gloss finish.

     

    Product Features and Benefits



      • Surface tolerant primer/coating for wide use in Marine and Protective Coatings


      • Marine use: suitable on topsides, decks, superstructures and cargo holds


      • Excellent corrosion resistance


      • Compatible with various aged coatings


      • Fast curing


      • Suitable as floor coating for pedestrian traffic with dry to walk on time of 6 hours at 20°C (68°F)


      • Good impact and abrasion resistance


      • Smooth film, easy to clean


      • Resistant to splash and spillage of a wide range of chemicals


      • Available in standard and custom colours, including aluminium


      • For Cargo holds - available in grey ( 5177 ) and redbrown ( 6179 ) colours only


      • Semi-gloss finish



     

    Method of Application



      • Air spray


      • Airless spray


      • Brush


      • Roller



    Note:

      • Adequate ventilation must be maintained during application and curing (please refer to Information Sheets 1433 and 1434)


      • Should SigmaCover 350 or the total coating system (2 x 125 μm/2 x 5.0 mils) be applied in excess of the specified dry film thickness, then the time necessary to reach full cure will be increased


      • For cargo hold application: for full cure for hard angular cargoes please contact us for technical advice.



    Please refer to the product Data Sheet for surface preparation, mixing and application instructions.

     

    Overcoating


    Please click here to contact us to discuss suitable topcoats for use with PPG SigmaCover 350.

     

    Thinner


    The following thinner is recommended for PPG SigmaCover 350:



    Note:

      • The temperature of the mixed base and hardener should preferably be above 15°C (59°F), otherwise extra thinner may be required to obtain application viscosity


      • Adding too much thinner results in reduced sag resistance


      • Thinner should be added after mixing the components



    Please refer to the product Data Sheet for further details regarding the required volume of thinner.

     

    Cleanup





     

    Technical Details


    Basic data at 20°C (68°F):


    Number of components Two
    Mass density 1.4 kg/l (11.7 lb/US gal)
    Volume solids 72±2%
    VOC (Supplied) Directive 1999/13/EC, SED: max. 263.0 g/kg max. 361.0 g/l (approx. 3.0 lb/US gal)
    Recommended dry film thickness 100 - 150 μm (4.0 - 6.0 mils) for airless spray
    Theoretical spreading rate 5.8 m2/l for 125 μm (231 ft2/US gal for 5.0 mils); 4.8 m2/l for 150 μm (192 ft2/US gal for 6.0 mils)
    Dry to touch 2 hours
    Overcoating Interval Minimum: 6 hours Maximum: 21 days
    Full cure after 7 days
    Shelf life Base: at least 24 months when stored cool and dry; Hardener: at least 24 months when stored cool and dry
    Pot life 3 hours at 20°C (68°F)


     

    Please refer to the Data Sheet for additional technical data.

     

    Safety Precautions


    For paint and recommended thinners see Information Sheets 1430, 1431 and the relevant Material Safety Data Sheets.

    This is a solvent-borne paint and care should be taken to avoid inhalation of spray mist or vapour, as well as contact between the wet paint and exposed skin or eyes.

    Please refer to the product Data Sheet and Material Safety Data Sheets for full details regarding the safe use of this product. 

     

    Datasheet

    ×

    Send us a message

    Your data is safe with us. We will never pass on your details to a third party. You can view our Privacy Policy here