Skip to product information
1 of 3

Barpimo White Wood Water-Based Topcoat

Barpimo White Wood Water-Based Topcoat

Brand: Barpimo

Regular price From £46.50
(£55.80 Inc VAT)
Regular price Sale price £46.50
Sale Sold out
Shipping calculated at checkout.
Barpimo White Wood Topcoat (Hydrobarp Care White) is a single component, water-based white pigmented topcoat. Pack Size: 5 kg Colour: White Gloss levels: 10, 30 and 50   Product Description Barpimo White Wood Topcoat (Hydrobarp Care White) is ideally suited for MDF read more

Select Your Options

Finish
Colour
Size

View full details
  • DESCRIPTION
  • Datasheet

DESCRIPTION

Barpimo White Wood Water-Based Topcoat

Barpimo White Wood Topcoat (Hydrobarp Care White) is a single component, water-based white pigmented topcoat.

    • Pack Size: 5 kg

    • Colour: White

    • Gloss levels: 10, 30 and 50


 

Product Description


Barpimo White Wood Topcoat (Hydrobarp Care White) is ideally suited for MDF furniture and carpentry (wardrobes, shelves, wood cladding, boards, etc.) 

 

Product Advantages



    • Single component

    • Water-based

    • High covering power

    • High level of hardness and physical resistance

    • good thixotropy which facilitates vertical application

    • Ideal for varnishing indoor furniture and woodwork

    • Short drying times

    • Unlimited pot-life - subject to correct storage

    • Non-flammability

    • Low odour

    • Simplicity of use

    • Ready to use



The Advantages of Using Water Based Coatings


One-pack water-based coatings, especially wood coatings for interiors, have no pot life. This therefore removes problems associated with traditional solvent-based polyurethane products.

They are simple and practical coatings because they are easy to work with. Ready to use and the product can be recovered and reused. This is provided it is reintroduced into its original tin and carefully closed - air tight.
Prolonged contact with air must always be avoided.

Water-based coatings are normally applied by spray, roller or brush, this ensures you have an easy application process of choice.

 

Typical Hydrobarp Application System


One coat of Hydrobarp Fondo Care Blanco
Sand using a 320 grit product
One coat of Hydrobarp Fondo Care Blanco
Sand using a 320 grit product
One to two coats of Hydrobarp Care White top-coat.

 

Application Remarks


If you wish to shorten drying time, a flash off period of 5-10 minutes is recommended before force drying with hot air, Infrared lamps or microwave driers.

 

Remarks



    • Finish for painting onto primers from the Hydrobarp line

    • If you wish to shorten drying time, you can force-dry with hot air or use infrared or microwave driers.

    • If repainting is required after applying the first topcoat, gently sand to achieve adherence between coats

    • Shake contents of containers before use.

    • Clean utensils with water immediately after use.

    • Do not store at below 5ºC

    • For toxicological standards, consult the Safety Data Sheet


 

Safety


Please refer to the Product Data Sheet and Safety Data Sheet or contact us for advice.

 

Contact Us


For further advice regarding the use of this product, technical support or a quotation please contact us.

 

Datasheet

×

Send us a message


Your data is safe with us. We will never pass on your details to a third party. You can view our Privacy Policy here