CWG Grout

CWG Grout

Environmentally-Friendly Fine Grout

CWG Grout is a dry pre-blended grout consisting of a blend of natural cement based binder, special dried and graded aggregates and retarders that is resistant to chloride penetration.

• Yield: Mixed with 4 litres of water a 25 kg bag will produce approximately 10 litres of finished grout

• Pricing: Please contact us for a quotation

 Product Description

CWG Grout is a blend of a Natural Cement, food grade retarders specially recovered aggregates and super plasticisers. It is an environmentally-friendly grout to be used for repairs around sewers, ground stabilisation, work around the sea, grouting around tunnel linings and areas where chemical attack or pollution is likely.

The product only requires to be added to water (see mixing instructions for further details). It can be used in cold & wet conditions, sets under water and can be used to stop running water.

Recommended Uses

• Chemical Resistance
• Waterproof grout
• Grouting during repairs to sewers
• Controlled soil stabilisation grouting
• Void filling
• Work around the sea
• Wherever pollution or chemical attack is likely 

Sectors

• Utilities
• Construction
• Civil Engineering
• Sea Defence

• Mining

Product Advantages

• Excellent adhesion
• Low shrinkage
• Excellent resistance to pure water and sulphated water
• Excellent resistance to aggressive chemicals
• Very good cohesion and mixing
• Fine compact surface
• No curing membrane necessary
• Can be used in wet conditions
• Can be used under water
• Controlled setting
• Fine particle size for greater penetration
• Set down to zero
• Can be used in contact with potable water
• Can be injected in to artesian water bearing strata, as it contains no material to leach out into the aquifer

Natural Cement Product Rang

Related Product Videos

The following videos feature NATCEM 35 - please refer to the product data sheet for full instructions regarding the use of CWG Grout.

Please refer to the product data sheet or contact us for advice.

Mixing

Please refer to the product data sheet or contact us for advice.

Application

Please refer to the product data sheet or contact us for advice.

Clean up

CWG Grout should be removed from tools and equipment with water immediately after use.

Storage

CWG Grout is packaged in a polythene inner bag with a resealable tie within a stitch sealed woven polypropylene outer bag, which should be stored in dry conditions and will last for at least twelve months.

Precautions

We strongly recommend the use of gloves, goggles and mask. A full material safety data sheet relating to this product is available - please contact us to request a copy.

Contact Us

For further advice regarding the use of this product, technical support or a quotation please contact us.