Select Your Colour
Guard STV- Stoving paint
Guard STV- Stoving paint
Brand: Guard
Select Your Options
Couldn't load pickup availability
- DESCRIPTION
- Datasheet
DESCRIPTION
Description
Stoving paint for the protection and decoration of steel components, fabrications and other suitably prepared substrates.
Where to use
Principally intended for prepared mild steel substrates, ferrous and suitable prepared non-ferrous metal substrates, but excluding zinc/galvanized iron.
Technical Information
Colours: Full tintable colour range. All RAL & BS4800
Colours and specials on request
Pack Size: 5 litre, 20 litre
Gloss Level: Gloss.
Resin Type: Alkyd
Components: Single Component
Generic Type: Solvent-based
Theoretical Spreading Rate: (approx) 13m² per litre based on 50μm wft
Volume Solids: (approx) 42-43%
Dry Film Thickness: (DFT) 2022μm
Wet Film Thickness: (WFT) 50μm
Flash Point: 23-32°C
VOC Content: 600gms/litre
Temperature Resistance: 200°C
Application
Ensure surfaces are clean, dry and free from grease and other contamination before coating. Thoroughly degrease and where applicable, abrade to remove rust and promote good adhesion of the coating. For optimum corrosion protection, mild steel should be blast cleaned to Sa2.5 or power tooled to achieve ST3. Complex structures may be more effectively cleaned by HPWJ (high pressure water jetting).
Substrate temperature during application and curing should be above 5°C (41°F).
Substrate temperature during application and curing should be at least 3°C (5°F) above dew point.
| Brush | No | |
| Roller | No | |
| Conventional spray | Yes | |
| Airless spray | No | |
| Air assisted airless spray | No |
Recommended Thinner : Guard Solvent A
Datasheet
