Select Your Colour
International Interlac 665
International Interlac 665
Brand: International Paint
Select Your Options
Couldn't load pickup availability
- DESCRIPTION
- Datasheet
DESCRIPTION
A single component alkyd gloss enamel finish.
Intended Uses:
Maintenance coating for use in a wide range of industrial environments including offshore, petrochemical and chemical plants.
Suitable for areas of limited chemical exposure where an economical single pack finish coat is required.
As a cosmetic finish coat for alkyd based systems intended for both interior and exterior exposure.
Additional Information:
Interlac 665 is designed primarily for site application. Airless spray application at factory can easily lead to over-application with slow through drying and difficulty in handling.
Over-application can also cause wrinkling on overcoating after ageing. Alternative alkyd finishes are available which are more suitable for factory use.
Level of sheen and surface finish are dependent on application method. Avoid using a mixture of application methods whenever possible. As with all alkyd systems, Interlac 665 has limited chemical and solvent resistance and is not suitable for use in immersion situations or in conditions of continuous condensation.
Interlac 665 is not designed for application over epoxies or polyurethanes, and should not be applied over zinc based primers because of dangers of saponification of the alkyd resin and consequent adhesion loss.
For brush and roller application, and in some colours, two coats of Interlac 665 may be required to give uniform coverage. Available in a wide range of colours produced via the Chromascan system.
Datasheet
