Mapefix PE Wall

Available in 300 and 380ml bottles

WHERE TO USE

Mapefix PE Wall is an adhesive for chemically anchoring metal bars in holes made in brick, stone and mixed masonry. It is a two-component, styrene-free product made from polyester resins. Specifically formulated for anchoring steel and zincplated stainless steel threaded elements which transmit light loads to solid, semi-solid and perforated masonry. It is also an ideal solution for anchoring close to edges or when there is a limited pitch between each anchor, in that no stress is generated as with conventional mechanical expansion fasteners. Mapefix PE Wall is recommended for anchoring elements in internal and external substrates with a horizontal, vertical, inclined or overhead axis, and is particularly recommended for anchors in perforated substrates or substrates subject to light stress. Mapefix PE Wall is recommended for anchoring elements in place, such as: · plant equipment; · sanitary fittings; · aerials; · signs; · window and door fittings.

TECHNICAL CHARACTERISTICS

Mapefix PE Wall is a two-component chemical anchoring product supplied in 400 ml cartridges with two separate compartments containing component A (resin) and component B (catalyser) at the correct mixing ratio by volume. The two components are mixed together when they are extruded via the static mixer supplied with the cartridge. The mixer is screwed to the end of the cartridge, and no preliminary mixing of the two components is required. If only part of the cartridge is used, the remaining product may be used, even after a number of days, by replacing the original static mixer clogged by hardened resin with a clean, new one. Mapefix PE Wall does not contain styrene which makes it suitable for use in areas with poor ventilation. Mapefix PE Wall is a chemical anchor made from styrene-free resins, suitable for application on solid and perforated building materials, such as: · masonry; · bricks; · stone. It may only be used in concrete if there is no capillary rising damp. Mapefix PE Wall is applied in holes made with a drill or hammer drill. We recommend using the drill feature only on perforated substrates. Mapefix PE Wall is certified according to European Standard ETAG 029 (anchors in solid, semi-solid and perforated masonry). Mapefix PE Wall 400 ml cartridges need to be used with a special extrusion gun for 60 mm diameter cartridges.