Please note; This product has been discontinued and replaced with: Noxyde Plus
An ideal alternative product is Guard ELC - a 200% elasticity, dry-fall elastomeric roofing and cladding coating
Rust-Oleum Noxyde is an anti-rust elastomeric coating for roofing and cladding.
- Available in 5kg or 20kg units.
Rust-Oleum Noxyde is a single pack high performance water-based elastomeric coating with unequalled corrosion protection.
Pack sizes: 5 kg and 20 kg
Colours: Various available - see list below
Noxyde is a single pack water-based elastomeric coating with unequalled corrosion protection, up to 20 years in the highest corrosion class C5-M, according to ISO 12944.
It is best used on iron, steel, special alloys, galvanised and metallised iron, steel, aluminium, copper, zinc, lead, plastisol steel structures, cut edge corrosion, structural steel, metal cladding and plastisol roof sheets, commercial units, barns, etc. It can even be diluted with 25% water to be used as an adhesion primer coat for only slightly and even non-porous surfaces such as glass, smooth bricks, polished-concrete and ceramics.
- 200% elastic coating that doesn’t crack or peel.
- Dry fall product; means that the overspray turns to dust before hitting the ground.
- Primer and topcoat in one.
- U.V and impact-resistant.
- Typical 2-coat system.
- No mixing or induction time.
- Re-use leftover paint.
- Kinder to the environment over similar solvent based coatings.
- Simply put the gun in water during breaks.
- Pure White
- Grey-White RAL9002
- Light Grey
- Pebble Grey RAL7032
- Silver-Grey RAL7001
- Goosewing Grey BS 10A05
- Anthracite Grey RAL7016
- Moss Green RAL6005
- Reseda Green RAL6011
- English Red
- Signal Black RAL9004
Noxyde Information Video
Rust-Oleum Noxyde Metal Cladding Paint should be applied by using either brush, roller or airless spray. Temperatures should be between 8°C and 55°C whilst the Noxyde is being applied. After approximately an hour and a half the paint will be touch dry and suitable to re coat after 24 hours.
To download the Rust-Oleum Noxyde brochure please click here.
Noxyde Tape is a self-adhesive tape made of a butyl rubber compound protected by a Fleece in Polypropylene. Designed to work for edge laps when applying Rust-Oleum Noxyde systems to roofs and cladding.
Case Study Videos
Case Study 1
Case Study 2
For further advice regarding the use of this product, technical support or a quotation please contact us.