Sherwin William Resuprime ESD

PRODUCT DESCRIPTION

Resuprime ESD is a two-pack epoxy primer containing conductive fillers used to create a conductive layer underneath Sherwin-Williams staticdissipative flooring systems to allow consistent earthing of electrical charge.

ADVANTAGES

• Excellent adhesion 
• Conductive with very low electrical resistance 
• High solids 
• Low odour 
• Ease of application

RECOMMENDED USE 

As a conductive primer for all Sherwin-Williams static-dissipative flooring systems

MIXING AND APPLICATION

Materials should be pre-conditioned at 15°C to 25°C prior to use. Mix
the entire contents of the base component with the hardener component
using a low speed electric mixer (300 to 400 rpm) for 1 to 2 minutes
until homogeneous. The mixed unit should be applied immediately after
mixing by roller or brush.
Resuprime™ ESD should be applied over the top of a copper tape grid to
aid the electrical earthing. Please refer to specific System Sheet for more
information.
Note: Application by squeegee is not recommended for this product as
there is the potential to damage the copper tape grid.