Select Your Colour
- DESCRIPTION
- Datasheet
DESCRIPTION
SigmaCover 456 HS is a two component high solids polyamide cured re-coat-able zinc phosphate epoxy primer/coating.
- Available in a 4 litre or 20 litre unit.
--
Areas of use
SigmaCover 456 HS is a two component high solids polyamide cured re-coat-able zinc phosphate epoxy primer/coating.
Additional product benefits
General-purpose epoxy primer/coating for steel and concrete structures in atmospheric exposure
Can be recoated with various two-component and conventional coatings, even after long weathering periods
Free from lead- and chromate-containing pigments
Excellent rust preventing properties in industrial or coastal atmospheres
Tough, with long-term flexibility
Cures at temperatures down to -5°C (23°F)
Good adhesion to steel
Easy application, both by airless spray and brush
Sigmacover 456 HS is also a highways agency approved coating number 116.
Areas of use
Specifically designed and created to be used on steel and concrete structures in atmospheric conditions i.e. heavy industry and coastal zones. With excellent rust and corrosion preventative properties, this is the perfect coating for adverse weather sited projects.
Application process
Sigmacover 456 HS can be applied by using either a brush or airless-spray. Can be recoated with various two-component products even after extended weathering. Even ures at temperatures as low as -5◦C. Touch dry after 6 hours, recoat-able after 8 hours.
Additional product benefits
Free from lead and chromate containing pigments makes it friendlier for the environment and the user.
A wide range of colours.
Eggshell finish.
With a pot life of 4 hours at 20°C
Full cure after 4 days
Tough and flexible, meaning it will not crack or peel even if the surface bends or moves.
Supporting product;
PPG thinner 91-92 is the ideal solvent specifically designed for use with Sigmacover 456 HS and many PPG coatings.
Datasheet


×