UltraScape Flowpoint Smooth - Pallet Price

Pallet Pack Size: 25 kg paper bags x 56 packs - discounted pallet price

Colours: Natural Grey & Charcoal

Yield: Approximately 13.9 litres per 25 kg bag

UltraScape Flowpoint Smooth: Rapid Set Flowable Grout

UltraScape Flowpoint Smooth - Pallet Price deal for 56 packs. Flowpoint Smooth is an easy-to-apply pre-mixed patio and paving jointing compound. Ideal for smooth paving stones and slabs with joints as small as 3 mm. 

For bulk orders please contact us on 01933 426225 for the best deals available. Large local stock at multiple U.K. branches, with collection by appointment welcomed. To locate your nearest branch please click here.

To view our singular pack prices please click here.

Product Description

UltraScape Flowpoint Smooth is ideally suited to smooth paving stones and slabs, providing a seamless surface to your construction. It has a high fluid consistency for early trafficking that conforms to the strict demands of BS 7533. It is ideal for all pavements where a rigid or bound void-free joint is required. The product is suitable for application in town centre pedestrian schemes, pathways and carriageways, and can be used with natural stone, concrete flags and clay paviours.

Product Advantages

• Provides a seamless surface

• Open to foot traffic in 1 hour

• Open to vehicular traffic in 4 hours

• Rapid setting

• Exceptional bond strength

• Shrinkage compensated

• Mixes quickly on-site with water

• Initial set after 30 minutes at 20°C

• Economical to use

• Conforms to BS 7533

• Ideal for large-scale projects

Information Video

Brochure

To download the UltraScape Compliant Paving System brochure please click here.

Supporting Products

• Ultrascape Eco-Bed – bedding material

• Ultrascape Pro-Prime Slurry Primer – provides an exceptional bond between your paving and bedding mortar 

Mixing and Application
Once the paving is ready to receive the grout the following method must be adhered to:

• Immediately prior to jointing it must be ensured that the joints are free from debris and all ponded water removed

• The paving surface and joints must be pre-soaked and kept wet until the jointing process has been completed

• A 25kg bag requires 4.25 litres of water and must be mixed for between 3 and 5 minutes until a smooth lump-free consistency has been achieved

• Apply the mortar without delay. Do not store liquid mortar other than in transit from mixer

• Mortar must be carefully forced into the joints using a suitable rubber squeegee

• The mortar should be constantly moved over the surface to repeatedly top up joints in which the mortar may have slumped following initial placement

• Use the rubber squeegee to remove as much mortar as possible from the surface

• The surface must be kept constantly moist using a soft spray of water

• When the jointing mortar has hardened sufficiently or achieved its initial set the paving surface must be cleaned using a brush and copious amounts of water

• Cleaning must be carried out thoroughly and no mortar must be allowed to remain on the surface of the paving 

Technical Details
Flowpoint Smooth is a fully pre-mixed dry-pack which only requires the addition of water on-site. It can fill joints from 3 mm - 50 mm wide with a minimum target depth of 20 mm, up to 200 mm in one application. This highly fluid grout achieves a final compressive strength of 49.6 N/mm² (results achieved using 4.25 litres of water per 25 kg bag), and will reach initial set in 30 minutes, will accept light foot traffic after 1 hour, and vehicular traffic after 4 hours (dependent upon temperature).

Precautions

• Wash all tools frequently

• Mix only enough material to apply in 4 minutes

• Never remix or add extra water

• Wear protective clothing

• Cool temperatures retard, warm temperatures accelerate

Please note: a small trial should be done to ensure compatibility with the stone being used as it is impossible to test all stone types. 

Safety

• Please ensure that appropriate PPE is used when preparing, mixing and applying products

• Always wash hands before consuming food and make sure that materials are kept safely out of reach of children and animals

• Avoid skin and eye contact - wet cement can burn the skin

• Please dispose of packaging and waste responsibly and in accordance with local authority requirements

• A full material safety data sheet relating to this product is available - please contact us to request a copy 

Contact Us
For further advice regarding the use of this product, technical support or a quotation please contact us.