Select Your Options
Ultra-quick setting, smoothing, wearing screed for high abrasion-resistant Industrial floor coverings at a thickness from 5-40mm.
Ultratop Industrial may remain on view as a finished floor surface due to its high mechanical strength, and is used specifically for internal industrial buildings. The product is used for levelling or smoothing new or existing concrete and screed substrates, to make them suitable for industrial use for example, in workshops, factories, store rooms, plant rooms, garages and warehouses. It is a natural finish product.
Ultratop Industrial is a self-levelling product in powder form available in grey, made up of special quick-drying and quicksetting binders, specially graded silica sand, synthetic resins and special additives developed in MAPEI’s own R&D Laboratories.
When mixed with water, Ultratop Industrial becomes a self-levelling compound which is easy to apply either by hand or pump in thicknesses from 5 to 40 mm.
After setting, which takes place in only a few hours, Ultratop Industrial has a high level of compressive and flexural strength, bonds perfectly to the substrate and thanks to its special composition, dries quickly so that any further finishing
coat may be applied after a very short time.
Ultratop Industrial complies with the principles defined in EN 13813 “Screeds and materials for screeds – Materials for screeds – Properties and requirements”, which defines the requirements applied to materials for screeds used in the
construction of internal floors. Screeds and structural covering, such as those which help increase the load-bearing capacity of floors, are not included in this Standard.
Resin flooring and cementitious screeds are included in this specification. They must bear the CE symbol, as illustrated in attachment ZA.3 Tables ZA1.5 and 3.3.
Areas of Use
Ultratop Industrial is used internally in industrial buildings, for levelling and smoothing new or existing concrete and screed substrates in thicknesses from 5 to 40 mm.
Ultratop Industrial can be used inside warehouse industrial areas and
surfaces where rubber wheeled vehicles are in use.
Ultratop Industrial may be left as a finished floor due to its high mechanical strength and resistance to abrasion and thanks to its versatility, is suitable for numerous applications in the building sector for industrial use.
Some application examples
· New floors in workshops, factories, store rooms, plant rooms, garages and warehouses.
· Abrasion-resistant floors on concrete and screed.
· Industrial floors that must