Fosroc Lokfix E45T

Technical Information

Lokfix E45T is a two component vinyl-ester anchoring material, supplied in single component cartridges with a static mixer nozzle. When applied it sets and cures rapidly to firmly secure a variety of steel fixings into concrete and masonry substrates. Two additional grades of Lokfix vinylester resin are available, selection is based upon substrate, installation temperature and compliance : Lokfix E55S: Standard temperature grade, optimised for substrate installation temperatures between -10 to +30ºC. Lokfix E55L: Low temperature grade, optimised for substrate installation temperatures: –20 to +15ºC. Other grades of Lokfix are also available Lokfix E35 Resin anchor cartridge system based on styrene free polyester for lightweight fixings into concrete and masonry Lokfix E77 Resin anchor cartridge system based on pure epoxy for heavy duty anchoring with 100 year service life.

Where To Use

For concrete (solid, porous and light), masonry and hollow bricks.

•  Accredited* for use in dry, wet and flooded concrete substrates, internal and external exposure.
•  Can be used with cracked concrete
•  Fixing of post installed reinforcement and tension anchors
•  Anchoring of threaded rod fixings
•  Can be applied to a wide variety of fixing and rebar sizes
•  For horizontal, vertical and overhead application
•  Bonding and surface crack sealing applications prior to Nitofill injection.
•  C1 and C2 seismic resistance*

Advantages

• High bond strength
•  Extended open time for working in high temperatures or on complex setting configurations.
•  Rapid return to service
•  Can use with a good quality skeleton gun (300ml size), No additional mixing equipment required
•  Does not apply expansive force to the substrate
•  Enables fixings closer to edges than mechanical anchors
•  Low VOC
•  Re-usable by replacing sealing cap product may be kept to the end of original shelf life.
•  Waterproof, protecting the embedded fixing from corrosion and water penetration into the substrate.