Fosroc Lokfix E77

Technical Information

Lokfix E77 is a two-component Epoxy anchoring material, supplied in 3:1 ratio side-by-side cartridges with a static mixer nozzle. When applied it sets and cures to firmly secure a variety of steel fixings into concrete and solid masonry substrates. Other grades of Lokfix are also available Lokfix E35 Rapid curing resin anchor cartridge system based on styrene free polyester for lightweight anchoring. Lokfix E55/E45 Rapid curing resin anchor cartridge system based on styrene free vinyl-ester for heavy / medium duty anchoring.

Where To Use

For concrete (solid, porous and light) and solid masonry.

•  Accredited* for use in dry, wet and flooded concrete substrates, internal and external exposure.
•  Can be used with cracked concrete
•  Fixing of post installed reinforcement
•  Anchoring of threaded rod fixings
•  Anchoring of internal threaded rod sleeves
•  Can be applied to a wide variety of fixing and rebar sizes
•  For horizontal, vertical and overhead application
•  C1 and C2 seismic resistance*

Advantages

•  High durability: Tested to achieve 100 year design life*
•  High Bond strengths for heavyweight fixings or economical design.
•  No additional mixing equipment required
•  Does not apply expansive force to the substrate
•  Fixings can be spaced closer together than mechanical anchors
•  Enables fixings closer to edges than mechanical anchors
•  Low VOC
•  Re-usable by replacing sealing cap product may be kept to the end of original shelf life.
•  Tested with diamond drilled bore holes*