International Interzone 954BG

International Interzone 954BG is a two component, low VOC, high solids, modified epoxy barrier coating specifically designed to provide long term steel protection via brush or roller application techniques. Will continue to cure when immersed in water and has excellent cathodic disbondment resistance.

• Pack size: 5 litre unit

• Colours: Dark Grey

  

Recommended Uses

International Interzone 954BG is primarily designed for use in offshore splashzone maintenance, where its continued cure under immersed conditions makes it ideal for coping with tidal movements and surges. May be applied to reoxidised and slightly damp surfaces.

Interzone 954BG is intended for use in those instances where the performance of Interzone 954 is required but spray application is not possible.

 

Surface Preparation

The performance of International Interzone 954BG will depend upon the degree of surface preparation. The surface to be coated must be clean and free from contamination. Prior to paint application all surfaces should be assessed and treated in accordance with ISO 8504:2000. Accumulated dirt and soluble salts must be removed. Dry bristle brushing will normally be adequate for accumulated dirt.

Soluble salts should be removed by fresh water washing. Oil or grease should be removed in accordance with SSPC-SP1 solvent cleaning.

 

Method of Application

• Brush

• Roller

Please refer to the Data Sheet for additional preparation, application and safety instructions prior to usage.

 

Systems Compatibility

International Interzone 954BG will generally be applied to bare steel prepared by dry abrasive blasting, wet abrasive blasting or ultra high pressure hydroblasting.

 

Recommended Primers for Interzone 954BG:

• Intercure 200 epoxy primer

• Intercure 200HS epoxy primer

• Intergard 251 epoxy primer

• Intergard 269 epoxy primer (for underwater use)

• Interline 982 epoxy primer (for underwater use)

• Interzinc 22 zinc-rich ethyl silicate primer (mist or tie coat recommended)*

• Interzinc 52 zinc-rich epoxy primer

• Interzone 1000 epoxy coating

Recommended Topcoats for Interzone 954BG:

• Interfine 629HS acrylic finish

• Interfine 691 epoxy acrylic finish

• Interfine 878 high solids finish

• Interfine 979 isocyanate-free polysiloxane finish

• Intergard 740 epoxy finish

• Interthane 870 polyurethane finish

• Interthane 990 polyurethane finish

For other suitable primers and topcoats please contact us for technical advice.

 

Thinner

The recommended thinner for Interzone 954BG is International Thinner GTA220. Do not thin more than is allowed by local environmental legislation.

 

Clean Up

Clean all equipment immediately after use with International Thinner GTA822. All surplus materials and empty containers should be disposed of in accordance with appropriate regional regulations/legislation.

 

Safety Precautions

This product is intended for use only by professional applicators in industrial situations in accordance with the advice given on the Data Sheet, the Material Safety Data Sheet and the container(s), and should not be used without reference to the Material Safety Data Sheet (MSDS).

All work involving the application and use of this product should be performed in compliance with all relevant national, Health, Safety and Environmental standards and regulations.

In the event welding or flame cutting is performed on metal coated with this product, dust and fumes will be emitted which will require the use of appropriate personal protective equipment and adequate local exhaust ventilation.

 

Contact Us

For further advice regarding the use of this product, technical support or a quotation please contact us.