ShotCrete 513

--

 

ShotCrete 513

ShotCrete 513 is a fast setting and curing rapid strength gain dry spray concrete that is resistant to chloride penetration consisting of a blend of natural cement based binder specially selected and dried loose graded aggregates all passing a 2 mm sieve.

• Reg. 31 Approved for use in public water supplies

• Yield: Generally 1 x 25 kg bag of ShotCrete 513 mixed with a water/cement ratio of 38% will produce approximately 10 litres of concrete

• Pricing: Please contact us for a free quotation

 

Product Description

ShotCrete 513 is a concrete repair mortar is based on a Natural Cement based binder. It is a dry spray environmentally friendly, fast setting, high early strength concrete repair material that starts at 20ºc to set in 4 minutes and is totally set in 10 minutes.

The product only requires to be added to water (see mixing instructions for further details) and unlike most other manufacturers products does not require primers, bonding agents and or curing agents. It can be used in cold & wet conditions, sets under water and can be, if required, from a minimum of 10 mm built up layer on layer to any thickness. This product can also be used to stop running water. This product is Reg.31 approved for contact with drinking water with only ½ hour curing period after set required.

 

Recommended Uses

• Chemical Resistance

• Concrete Repairs

• Tanking

• Reg.31 Approved products for contact with drinking water

• Sprayed Concrete

• Horizontal and vertical repairs

• Repairs to sewers

• Work around the sea including piers

• Quay walls and off shore platforms

• Repairs to bridges

• Repairs to dams and viaducts

• Tunnel repairs

• Retaining wall repairs

• Where high early strength is required

• Where pollution and chemical attack is likely

 

Sectors

• Utilities

• Construction

• Civil Engineering

• Railways

• Sea Defense

• Mining

• Water

 

Product Advantages

• Fast-setting

• Excellent adhesion

• Low modules of elasticity excellent for loose or friable substrates

• Low shrinkage

• Excellent resistance to pure water, sulphated water, seawater and de-icing salts

• Excellent resistance to aggressive chemicals

• Very good cohesion and mixing

• No curing necessary. It can be coated, covered or painted as soon as setting is complete

• Can be used in wet conditions

 

Natural Cement Product Range

NATCEM 35	NATCEM AC	NATCEM D	NATCEM DW
NATCEM Tank	NATSEAL	Grout 105	CWG Grout
LUL RapideSet	ShotCrete AS90	ShotCrete 430F	ShotCrete 437F
ShotCrete 513	ShotCrete 530	TrackCrete	WaterStop

 

Related Product Videos

The following videos feature NATCEM 35 - please refer to the product data sheet for full instructions regarding the use of ShotCrete 513.

 

Surface Preparation

Please refer to the product data sheet or contact us for advice.

 

Mixing

Please refer to the product data sheet or contact us for advice.

 

Application

Please refer to the product data sheet or contact us for advice.

 

Cleanup

ShotCrete 513 should be removed from tools and equipment with water immediately after use.

 

Storage

ShotCrete 513 is packaged in a 25 kg polythene inner bag with a resealable tie within a stitch sealed woven polypropylene outer bag, which should be stored in dry conditions and will last for at least twelve months.

 

Precautions

We strongly recommend the use of gloves, goggles and mask. Please see the product safety data sheet or contact us for full details.

 

Contact Us

For further advice regarding the use of this product, technical support or a quotation please contact us.