FasTop Multi T150

PRODUCT DESCRIPTION

FasTop Multi T150 SR is a polyurethane cement textured coating designed for application as an ant-slip floor finish onto concrete and FasTop flooring systems where required. The material uses univeral FasTop resin and hardeners to maintain flexibility in storage for the customer whilst also delivering the performance and properties that FasTop is known for. It can be applied by trowel and back rolled depending on the requirements and gives a hygienic textured finish that can be used for new screeds as well as refurbishing existing screeds and as coatings on concrete.

ADVANTAGES

• High chemical resistance 
• Textured anti-slip finish 
• Resistant to hot water 
• Hard wearing 
• Hygenic 
• Matt finish

RECOMMENDED USE

• A wide range of industrial applications such as: 
• Food and manufacture processing 
• Brewing and beverage 
• Pharmaceutical and chemical plant processing 
• Heavy duty plant and traffic areas 
• Dairies 
• Commercial kitchens 
• Abattoirs and meat processing

MIXING AND APPLICATION

Mixing: Add the FasTop Multi Part A component (base) and the FasTop Multi Part D (color package) to a suitable mixing vessel and mix for 1 - 2 minutes using a low-speed electric mixer or forced action mixer until homogeneous. Add the FasTop Multi Part B (hardener) component and mix again for 1 - 2 minutes until homogeneous. Add Part C (aggregate) steadily into the mixing vessel and mix for a minimum of 3 minutes until a uniform mixture is obtained. FasTop Multi T150 SR should be applied immediately after mixing to prepared areas.

Application: FasTop Multi T150 SR may be applied to substrates with a surface temperature in the range of 5-20°C and a relative humidity of 40% - 90% RH, with a minimum air temperature of 8°C and no condensation. Do not pre-warm this product as working times will be substantially reduced if materials are warm. NB: Cure times are extended at low temperatures. FasTop T150 SR should be applied at the required rate as soon after mixing as possible. (Delay can result in variation in surface finish, colour and add to application problems). The FasTop Multi T150 SR should be applied immediately by trowel and then finished with a roller to create a consistent texture. Floor areas should be cross rolled to ensure even application and to minimise roller marks. When applied to FasTop screeds and self-levelling systems as a seal coat the FasTop T150 SR should be worked rapidly and evenly over the area with a trowel and immediately back rolled at the coverage rates to create the required textured finish. See Sherwin-Williams FasTop System Guides for recommended floor systems.