Guard UPX-2K

Guard UPX-2K

Brand: Guard

Product Description: Heavy duty protective coating for concrete and steel. Provides long term water and chemical resistance. Epoxy coating chalk on exterior exposure. Tempe-rates of substrate must be at least 3°C above dew point. Drying will be retarded at temperatures read more

Contact us for price and availability details
×

Request price and availability details


Your data is safe with us. We will never pass on your details to a third party. You can view our Privacy Policy here

View full details
  • DESCRIPTION

DESCRIPTION

Product Description:

Heavy duty protective coating for concrete and steel. Provides long term water and chemical resistance. Epoxy coating chalk on exterior exposure. Tempe-rates of substrate must be at least 3°C above dew point. Drying will be retarded at temperatures below 10°C.

Typical Uses:

Ideal coating for the protection of floors and metal stairways used in difficult conditions. Ideal for warehouses, factories and public event spaces.

Practical Information:

Colours Full tintable colour range. All RAL & BS4800 colours and specials on request Pack Size 5 litre (Nominal Volume) Gloss Level Satin, Gloss Resin Type Epoxy Components Two Component Generic Type Solvent-based

Surface Preparation:

Always ensure surfaces are clean, dry and free from grease and other contamination before coating. New concrete floors - ideally floor should be shot blasted or mechanically grinded, though as a minimum must be thoroughly cleaned and decreased, and the concrete itself must then be fully cured, sound, dry and all surface dust and particles removed. Existing concrete floors – thoroughly remove all dirt, oil, grease and any other contaminants on the surface, ideally by means of shot blasting or mechanical grinding. If this is not possible is must be copiously cleaned, degreased and abraded with all loose chippings and dust completely removed. If a previous coating cannot be totally removed, please speak with our technical team who will advise on carrying out a small trial area to ensure compatibility, or recommend a suitable primer for cohesion.

Safety Precautions:

To avoid the risk of spillage always store and transport in an upright secure position. Materials are hazardous and can also be flammable therefore appropriate precautionary measures must be taken including the use of gloves, glasses and recommended P.P.E in accordance with the material safety data sheets (MSDS).

Important Notes & Disclaimer:

The above information should be used as a guide only and is not a guarantee or warranty. The New Guard Coatings Group and our supply / manufacturing partners have provided this information in good faith and to the best of our knowledge correct at the time of print. ‘Guard’ is a brand owned by New Guard Holdings Ltd. No liability will be accepted for incorrect colours or any other failure by the customer to check before use. This does not affect your statutory rights.

 

×

Send us a message


Your data is safe with us. We will never pass on your details to a third party. You can view our Privacy Policy here